降低烧结返矿率的途径与实践

通过对影响烧结返矿率的因素进行分析，从优化配料、强化制粒和造球、提高料层厚度、实现低碳低水均质烧结等几个方面着手，使烧结返矿率从1998年的23．6％降到了2003年的16．9％。     

掺Nd纳米ZnO薄膜特性研究

研究了用真空蒸发法在玻璃衬底上制备稀土掺杂纳米ZnO薄膜结构、导电性及光透射性能。结果显示 ,在 5 0 0℃氧化、热处理稀土元素Nd掺杂后能够明显改善纳米ZnO薄膜的结构特性 ,薄膜的晶粒尺寸随掺杂含量的增加而减小。掺Nd使ZnO薄膜的电性能有所改善但使纳米ZnO薄膜的光透射性有所降低。     

Effect of Y2O3, CeO2 on Sintering Properties of Si3N4 Ceramics

The effect of rare earth oxides Y203 or Ce02 on sintering properties of Si3N4 ceramics was studied and the mechanism of assisting action during sintering was analyzed. The results in dicate that the best sintering properties appear in Si3N4 ceramics with 5% Y203 or 8% CeO2. Secondary crystallites are formed at grain boundaries after heat treatment,which decreases the amount of glass phase and contributes to the improvement of high-temperature mechanical properties of silicon nitride.     

烧成及热处理工艺对钛酸锶铅基热敏材料性能及显微结构的影响

研究了烧成及热处理工艺对钛酸锶铅基热敏材料的阻温特性及显微结构的影响。通过扫描电镜（ＳＥＭ）和能量分散仪（ＥＤＡＸ）分析了材料的显微结构及不同形貌晶粒的成份。通过对组成、烧成及热处理工艺的控制，可得到具有Ｖ型ＰＴＣＲ特性的热敏材料。     

以YAG为添加剂的气压烧结氮化硅

本文以添加ＹＡＧ的反应烧结氮化硅（ＲＢＳＮ）为前驱体，采用气氛加压烧结的工艺，在０．５～９．０ＭＰａ氮气压力范围，研究了不同氮压对烧结体的密度、相组成、强度和显微结构的影响及其相互间的关系。研究表明，通过改变氮气压力能有效地调控材料的显微结构，材料的性能又受控于显微结构的变化。     

多传感器目标识别的图像数据融合技术研究

军事和空间技术的要求促进了微光技术的发展。微光图像实时处理技术是夜技术今后发展的重要方向，本文针对微光图像与脉冲激光测距仪的数据信息实时融合与显示的方法及其实现进行了研究。给出了系统框图及工作原理，为实现探测识别、跟踪的实时性、智能化和微型化，从而为研制新一代战术侦察与火控系统提供了具体有效的技术基础。     

Reactivity of steam in exhaust gas catalysis III. Steam and oxygen/steam conversions of propane on a Pd/Al2O3 catalyst

A 1% Pd catalyst (38% dispersion) was prepared by impregnating a γ-alumina with palladium acetylacetonate dissolved in acetone. The behaviour of this catalyst in oxidation and steam reforming (SR) of propane was investigated. Temperature-programmed reactions of C₃H₈ with O₂ or with O₂ + H₂O were carried out with different stoichiometric ratios S(S =[O₂]/5[C₃H₈]). The conversion profiles of C₃H₈ for the reaction carried out in substoichiometry of O₂ (S < 1) showed two discrete domains of conversion: oxidation at temperatures below 350°C and SR at temperatures above 350°C. The presence of steam in the inlet gases is not necessary for SR to occur: there is sufficient water produced in the oxidation to form H₂ and carbon oxides by this reaction. Contrary to what was observed with Pt, an apparent deactivation between 310 and 385°C could be observed with Pd in oxidation. This is due to a reduction of PdO_x into Pd⁰, which is much less active than the oxide in propane oxidation. Steam added to the reactants inhibits oxidation while it prevents the reduction of PdO_x into Pd⁰. Compared to Pt and to Rh, Pd has a higher thermal resistance: no deactivation occurred after treatment up to 700°C and limited deactivation after treatment up to 900°C, provided that the catalyst is maintained in an oxygen-rich atmosphere during the cooling.     

HL-1M装置的真空运行与质谱诊断

通过对 HL- 1M装置真空运行模式、真空运行参数、氦辉光放电清洗和硅化壁处理手段等的规范化 ,显著地改善了装置的真空壁出气、本底杂质浓度、托卡马克放电杂质出气比和再循环 ,成功地实现了高参数放电、长脉冲放电和装置暴露大气后快速恢复放电 ,并成功地为演证低混杂电流驱动、离子回旋共振加热、电子回旋共振加热、中性束注入、弹丸注入和分子束注入实验和升级等离子体运行等提供了良好的真空壁条件。描述了 HL- 1M装置真空系统、壁出气和再循环控制、质谱诊断和程序脉冲送气等方面的主要实验成果 ,并为 HL- 2 A装置的真空系统研制和运行提供了有益的参考     

发展我国冻干蔬菜产业大有可为

本文介绍了真空冷冻干燥食品的发展现状、特点及其工艺流程 ,着重讨论了发展冻干食品工业的广阔前景     

BaTiO_3系PTCR热敏电阻器用烧结助剂的研究

研究了烧结助剂的作用，实验结果表明：如只引入半导化元素，不引入烧结助剂，则室温电阻率ρ２５很大，甚至是绝缘体。由于烧结助剂的加入，既改善了ＰＴＣＲ热敏电阻陶瓷的烧结性，又改善了其ρ２５、耐电压Ｖｂ、ＰＴＣ效应等特性，从而使产品的各种特性易于重复。烧结助剂昔日多用ＡＳＴ，现在常用ＳｉＯ２，其加入量ｘ宜小于２％。ＳｉＯ２的纯度、杂质等化学特性，与粒子形状、粒度分布、晶系等物理特性，对ＰＴＣＲ热敏电阻器的电性能有很大的影响。据此提出了ＢａＴｉＯ３系ＰＴＣＲ热敏电阻器用ＳｉＯ２的技术标准。